Simple Switching Regulator Converter Circuit Diagram

This is a Simple Switching Regulator Converter Circuit Diagram  . The Max650 switching regulator produces a regulated 5 V from large negative voltages, such as the -48 V found on telephone lines. The resulting power supply operates with several external components, including a transformer, and it delivers 250 mA. The device includes a 140-V 250-mA pnp transistor, short-circuit protection, and all necessary control circuitry.

Simple Switching Regulator Converter Circuit Diagram

Read More..

100Khz Multiple Output Switching Power Supply Circuit Diagram

The 100Khz Multiple Output Switching Power Supply Circuit Diagram uses two VN4000A 400-V MOSPOWER FETs in a half-bridge power switch configuration. Outputs available are + 5 Vat 20 A and ±15 V (or ±12 V) at 1 A. Since linear three-terminal regulators are used for the low-current outputs, either ±12 V or ±15 V can be made available with a simple change in the transformer secondary windings. 

A TU94 switching regulator IC proVides pulse-width modulation control and drive signals for the power supply. The upper MOSPOWER FET, Q7. in the power switch stage is driven by a simple transformer drive circuit. The lower MOS. Q6, since it is ground referenced. is directly driven from the control !C.

 100Khz Multiple Output Switching Power Supply Circuit Diagram

Read More..

Build a Positive And Negative Voltage Switching Supply

Build a Positive And Negative Voltage Switching Supply. An LT1172 generates positive and negative voltages from a 5-V input. The LT1172 is configured as a step-up converter. To generate the negative output, a charge pump is used. C2 is charged by the inductor when D2 is forward-biased and discharges into C4 when LT1172`s power switch pulls the positive side of C2 to ground. 

 Positive And Negative Voltage Switching Supply  Circuit Diagram

 

Read More..