Thursday, December 19, 2013

The antenna impedance of Cell Phone Jammers can be conveniently calculated

The antenna impedance of Cell Phone Jammers can be conveniently calculated.
Although the RAZR fame, but a series of "hardcore" products continue to cut prices, but also to the current Motorola products, profit margin is only 11.2%, while rivals such as Nokia was 16.8%. As the cell phone sales continued to decline, Motorola on January 31, 2008 announced that it will consider selling cell phone unit. Was a summary of Motorola, "as also V3, loser V3", this sentence is probably the best summary. Motorola, a decline of the nobility, witnessed the cell phone from 1G to 2G era of history. 2G era, there are many companies that can be introduced, such as Nokia, we later re-described. Following the first 3G-related things to talk about. Speaking of 3G, had referred to a company --- Qualcomm. Many people say that Qualcomm is a rogue company, how a rogue law? The customer is interested in the jamming power range of Cell Phone Jammers .
Qualcomm, founded in July 1985. ? founder and chairman of Irwin Jacobs, the father was undertook CDMA. Qualcomms finest creations, Korea CDMA commercial operation is successful. However, Qualcomms royalties more outrageous expensive, according to South Korean Ministry of Information and Communication issued a report, using Qualcomms CDMA technology cell phone manufacturers in Korea during the period 1995-2005 a total of $ 2.6 billion to pay royalties . Reported that in 2004, including Samsung Electronics and LG Electronics of South Korean cell phone makers, including royalty payments totaling up to about $ 565.7 million, approximately $ 514 million in 2005. In China, 3G also mentioned this thing for several years, from 05 onwards, every year the media say, "3G licenses this year put the card", but was delayed until 2009, why still have not realized? The customer asks for the antenna impedance of Cell Phone Jammers .
The shadow which is inseparable from Qualcomm, because all the patents related to 3G technology, Qualcomm is an absolutely dominant position in CDMA2000, with the major basic patents, and patents account for 29% of the share. Qualcomm also holds 6% of WCDMA patents. Qualcomm has always adhere to high patent fees, negotiations stalled repeatedly, and many called it as rogue companies. Some people have to ask, 3G What are the advantages ah? In fact, is a major advantage: the Internet speed. We all know that the GPRS Internet access, speed is very slow, with the cell phone QQ also similar to browsing the Web becomes larger point is slow, and slower than downloading MP3 songs, download movies, even to die. The 3G cell phone not only can easily download music, but also smooth viewing television, movies, and make video calls. Among them, the board of the motherboard battery These prices are more transparent, housing a number of relatively large difference, I have seen more expensive imitation of NOKIA 8900 high purity steel shell, to be $ 250. Many kinds of motherboards, the MTK program, the current market appear more have 6223 platform and 6225 platforms. One 6223 platform does not support USB function, one of the 6223C of the CPU, camera supports up to 100,000 pixels, is common in low-end small-screen cell phone, 6225 to support 300,000 pixels, USB port expenses, in many of the big screen cell phone use it.
Read More..

Build a Full Wave Rectifier Circuit Diagram

This is the simple full wave rectifier circuit diagram.When equality of two equations shown in satisfied, full-wave output of circuit is symmetrical. The circuit uses a CA3140 BiMOS op amp in an inverting gain configuration.

Full Wave Rectifier Circuit Diagram

Full Wave Rectifier Circuit Diagram

Read More..

DC 6 5V to ±5V Converter

A symmetrical ±5V power supply is often needed for small, battery-operated operational amplifier projects and analogue circuits. An IC that can easily be used for this purpose is the National Semiconductor LM2685. It contains a switched-capacitor voltage doubler followed by a 5-V regulator. A voltage inverter integrated into the same IC, which also uses the switched-capacitor technique, runs from this output voltage. The external circuitry is limited to two pump capacitors and three electrolytic storage capacitors.

The IC can work with an input voltage between +2.85 V and +6.5 V, which makes it well suited for battery-operated equipment. The input voltage is first applied to a voltage doubler operating at 130 kHz. The external capacitor for this is connected to pins 13 and 14. The output voltage of this doubler is filtered by capacitor C3, which is connected to pin 12. If the input voltage lies between +5.4 and +6.5 V, the voltage doubler switches off and passes the input voltage directly through to the following +5-V low-dropout regulator, which can deliver up to 50mA.

DC 6.5V to ±5V Converter Circuit Diagram
DC 6.5V to ±5V Converter Circuit Diagram

C4 is used as the output filter capacitor. All that is necessary to generate the –5-V output voltage is to invert the +5-V voltage. This is done by a clocked power-MOS circuit that first charges capacitor C2, which is connected between pins 8 and 9, and then reverses its polarity. This chopped voltage must be filtered by C5 at the output. The unregulated –5 V output can supply up to 15 mA. The LM 2865 voltage converter IC also has a chip-enable input (CE) and two control inputs, SDP (shut down positive) and SDN (shut down negative).

If CE is set Low, the entire IC is switched off (shut down), and its current consumption drops to typically 6 µA. The CE input can thus be used to switch the connected circuit on or off, without having to disconnect the battery. The SDP and SDN inputs can be used to switch the VPSW and VNSW outputs, respectively. These two pins are connected to the voltage outputs via two low-resistance CMOS switches. This allows the negative output to be separately switched off, whereby the voltage inverter is also switched off. Switching off with SDP not only opens the output switch but also stops the oscillator.

There is thus no longer any input voltage for the –5 V inverter, so the –5 V output also drops out. The SDP and SDN inputs are set Low (< 0.8 V) for normal operation and High (>2.4 V) for switching off the associated voltage(s). The positive output of the LM 2865 is short-circuit proof. However, a short circuit between the positive and negative outputs must always be avoided. The IC is protected against thermal destruction by an over-temperature monitor. It switches off automatically at a chip temperature of around 150 oC. The full type number of the IC is LM 2685MTC. It comes in a TSSOP14 SMD package. National Semiconductor can be found on the Internet under www.national.com.

Read More..

Wednesday, December 18, 2013

Build a Digital Theremin Circuit Diagram

Theremin circuit shown in this schematic diagram uses digital component, so we can call it a digital Theremin. This circuit employs  logic inverter 74C04 or CD4069 hex inverter and CD4046 phase-locked-loop (PLL) IC. 

The CD4069 logic inverter is operated as a fixed-frequency oscillator with  frequency around 100kHz. The CD4046 is operated as a variable frequency oscillator which is adjustable around 100kHz. The exact center frequency of the on-chip oscillator is determined by R4, C2 and R3. Here is the schematic diagram of the circuit. 

Digital Theremin Circuit Diagram

The frequency of variable oscillator frequency circuit can be shifted several kilohertz by moving your hand approaching the antenna since the C2 and the antenna form an equivalent parallel capacitance. The frequency of the variable oscillator should be set to the same frequency of fixed oscillator when there is no hand or human body close to the antenna. 

This  calibration is done by adjusting the  zero control R4 pot with this simple rule: If  both oscillators (the fixed and the variable) are set to the same frequency then the Theremin will produce no output (silent). This Theremin circuit will start  producing audible tone if you move your hand approaching the antenna since it will shift the frequency of the variable oscillator. You can play this Theremin circuit by moving your right hand around the antenna and at the same time turning the volume knob R5 with your left hand.
Read More..

High Power Car Battary Eliminator

To operate car audio (or video) system from household 230V AC mains supply, you need a DC adaptor. DC adaptors available in the market are generally costly and supply an unregulated DC. To overcome these problems, an economical and reliable circuit of a high-power, regulated DC adaptor using reasonably low number of components is presented here.  Transformer X1 steps down 230V AC mains supply to around 30V AC, which is then rectified by a bridge rectifier comprising 5406 rectifier diodes D1 through D4. The rectified pulsating DC is smoothed by two 4700μF filter capacitors C1 and C2. The next part of the circuit is a seriestransistor regulator circuit realised using high-power transistor 2N3773 (T1).
High Power Car Battary Eliminator Circuit Daigram 
Fixed-base reference for the transistor is taken from the output pin of 3-pin regulator IC1 (LM 7806). The normal output of IC1 is raised to about 13.8 volts by suitably biasing its common terminal by components ZD1 and LED1. This simple arrangement provides good, stable voltcuit age reference at a low cost. LED1 also works as an output indicator.Finally, a crowbar-type protection circuit is added. If the output voltage exceeds 15V due to some reason such as component failure, the SCR fires because of the breakdown of zener ZD2. Once SCR fires, it presents a short-circuit across the unregulated DC supply, resulting in the blowing of fuse F1 instantly. This offers guaranteed protection to the equipment connected and to the circuit itself.
 High Power Car Battary Eliminator
This circuit can be assembled using a small general-purpose PCB. A goodquality heat-sink is required for transistor T1. Enclose the complete circuit in a readymade big adaptor cabinet as shown in the figure.

Source:  http://www.ecircuitslab.com/2011/09/high-power-car-battary-eliminator.html
Read More..

Best Power Protection Circuit Diagram

This is the Best Power Protection Circuit Diagram for you. (Read Power supply Protection Circuit Diagram ) To safeguard portable, emergency power repeaters from reverse or excessive voltage, Dl prevents incorrect polarity damage, and zener voltage determines the maximum voltage that will reach the rest of the circuitry. Use fast blowing fuse rated greater than the SCR current rating.

Read: Over voltage Protection Circuit Diagram

Best Power Protection Circuit Diagram

Best Power Protection Circuit Diagram

Read More..

Simple Frequency to Vvoltage Converter Circuit Diagram

This is Simple Frequency to Vvoltage Converter Circuit Diagram. In these applications, a pulse input at % is differentiated by a C-R network and the negative-going edge at pin 6 causes the input comparator to trigger the timer circuit. Just as with a V-to-F converter, the average current flowing out of pin 1 is IaverAGE = i (1.1 RjC^ f. 

In this simple circuit, this current is filtered in the network RL = 100 k ohm and 1 µF. The ripple will be less than 10 mV peak, but the response will be slow, with a 0.1 second time constant, and settling of 0.7 second to 0.1%.



Simple Frequency to Vvoltage Converter Circuit Diagram

Simple Frequency to Vvoltage Converter Circuit Diagram


Simple Frequency to Vvoltage Converter Circuit Diagram
Read More..